Your current position:Home»Service»FAQ

FAQ

  • Breakdown Maintenance of Laser Marking Machine

    1. Breakdown Phenomenon:Open the key switch, no response.Reason Analysis:1) No power or phase loss;2) The air switch is not closed;3) The emergency switch is pressed.Handling Method:1) Restore the power;2) Close the air switch;3) Back-out the emergency switch.2.Breakdow...

  • Breakdown Maintenance of Laser Welding & Cutting Machine

    1. Breakdown Phenomenon:Press the main switch, no response.Reason Analysis:1) No power or phase loss;2) The air switch is not closed;3) The emergency switch is pressed;4) Key switch is not open. Handling Method:1) Restore the power;2) Close the air switch;3) Back-out th...

  • Electrical Maintenance of Laser Welding & Cutting Machine

    Maintenance PurposeAs a precision electrical equipment, the laser welding machine must work in safe and reliable electrical environment, for fear of device damage and personal injury.Tools Required Multimeter × 1Internal hexagonal wrench × 1High pressure air gun × 1Wate...

  • Maintenance of LSF Fiber Laser Marking Machine

    1.Clean F-θ lens protective glass regularly, use clean cloth dipped in alcohol to wipe in one direction;2.Check fan operation regularly, replace the abnormal fans;3.Clean mouse and keyboard regularly;4.Clean laser fan and wind tunnel dust regularly. When power outage, u...

  • Maintenance and Replacement of Laser Pointer

    Maintenance Purpose Wrong operations may cause damage of laser pointer, such as welding on high reflectivity mirror material. Therefore, the damaged laser pointer should be replaced so as to ensure the normal operation of the equipment.Replacement CycleWhen the equipmen...

  • Maintenance of Welding Equipment Cooling System

    Maintenance PurposeLaser device will produce large amount of heat when it runs. If not discharge the heat in time, the laser device will not work properly because of the high temperature, or even cause damage to the internal components. In addition, the cooling circulat...

  • Maintenance and Replacement of Xenon Lamp

    Maintenance RulesLaser welding machine users or maintenance personnel must follow the maintenance methods strictly to replace xenon lamp. Specific steps are as followings:Step one: Quit welding system, turn the air switch and key switch successively to “OFF”, disconnect...

  • Maintenance of LSF Series Fiber Marking Machine

    Check the equipment according to daily maintenance content before operation.Please stop the machine immediately to check the equipment if found any unusual sound during operation.Shut down the machine through correct procedure after operation.Placing nonessential items ...

  • Maintenance of Laser Welding & Cutting Machine Optics Lens

    Laser welding machine users or maintenance personnel must follow the maintenance methods strictly. Specific steps are as followings:Step one: Wear respirator and rubber gloves (or finger gloves), choose a dustless place to clean lens;Step two: Take half piece of lens wi...

1/2Page
live800Link.websitechat
live chat